MAXIM SCHUNK
← News & Blog
Guide20 November 20267 min read

DJ Sync Button Explained: Why Synced Tracks Still Drift

Beat sync vs tempo sync, why synced tracks drift, how to fix beatgrids, how sync works on club CDJs, and whether using sync as a DJ is really cheating.

#DJ Technique#Sync#Beatgrid#rekordbox#Serato#Traktor#CDJ

Want to learn to DJ? 6 free lessons by Maxim Schunk: beatmatching, transitions, building a set.Start free →
Symbolic image, AI-generated
Symbolic image, AI-generated

Sync has been a sore point in DJ culture for twenty years. On forums it gets called cheating. In real booths, plenty of working DJs press it every night. Neither side tends to mention the part that actually matters: sync is only as good as the information it reads. When it works, two tracks lock together and stay there. When it goes wrong, it can be worse than no sync at all, because you trusted it and stopped listening. This guide covers what the button really does, why the different modes behave differently, why synced tracks still drift, and what to fix before you blame the software.

What does the sync button actually do?

Every modern DJ application analyses a track when you import it. It estimates the tempo and places a beatgrid, a row of markers on every beat with a stronger one on the first beat of each bar. When you press sync, the software reads two things from that grid. It reads the tempo of the deck you are syncing to, and in most modes it also reads the phase, meaning where the beats fall. Then it adjusts the pitch of your incoming deck to match.

That deck is the master, or tempo master. In most software the first deck you start, or the one you set manually with a MASTER button, becomes the reference. Every other synced deck follows it. Some programs can follow an internal master clock instead.

The key point is that grid-based sync never listens to the audio while it runs. It trusts the grid. If the grid is right, the kicks land together. If the grid is half a beat off, sync will hold the two tracks perfectly and perfectly wrong.

Beat sync vs tempo sync: what is the difference?

Most software offers two flavours, even if they are named differently.

  • Tempo sync matches only the BPM. The tracks run at the same speed, but you still have to line up the beats yourself, by starting the incoming track on the right beat or nudging it into place.
  • Beat sync matches BPM and phase. The software snaps the incoming track onto the beat of the master and keeps it there, even after loops, beat jumps or hot cue triggers.

Traktor uses exactly those names. Native Instruments calls Beat Sync the most reliable sync mode, and the manual says beatgrids must be set properly for it to work correctly. Tempo Sync is selected in the preferences, not on the deck. Serato calls the modes Simple Sync and Smart Sync. Simple Sync matches the BPM and snaps the two closest transients together, so it needs no beatgrid, but it does not keep the tracks phase-locked. Smart Sync relies on beatgrids and keeps tracks phase-locked. rekordbox and Pioneer DJ hardware call the feature Beat Sync. It matches BPM and beat position to the master deck and needs tracks that have been analysed so they carry beatgrid information.

The practical rule: beat sync does more for you, so a bad grid hurts more.

Why is my sync off or drifting?

When two synced tracks flam, the cause is almost always one of these five things.

  • The grid is offset. The first downbeat marker sits slightly before or after the real kick. Sync aligns the grids, so the audio ends up a few milliseconds apart. You hear a doubled, smeared kick rather than a full train wreck.
  • The BPM was detected wrongly. A track at 124 BPM analysed as 123.9 will look fine at the start and slide off over a long blend. Half-time and double-time errors, such as a 174 BPM drum and bass track read as 87, are another classic.
  • The track does not hold a steady tempo. Older disco, funk, live recordings and many edits were played by humans, not sequenced. A fixed grid cannot follow them. rekordbox's dynamic analysis mode and Serato's newer beatgrid engine try to handle tempo changes. For anything played by a drummer, check the grid by ear.
  • The master changed under you. If the software hands the master role to the deck you just started, the outgoing track may suddenly follow the incoming one. That is fine if both grids are clean and disorienting if one is not.
  • You overrode it. Touching the jog wheel, moving the tempo fader or scratching can take a deck out of sync or drop it back to tempo-only mode, depending on software and settings. Watch the sync indicator. If it changes colour or switches off, you are mixing manually again.

How do you fix a beatgrid so sync works?

On modern electronic music most grids need nothing or a ten-second fix. A routine that works in any software:

  • Zoom in on the first kick. Check that the first downbeat marker sits on the transient, not on a pickup, a reverse cymbal or silence. If it does not, move or reset the downbeat.
  • Jump to the last third of the track. If the markers still sit on the kicks, the BPM is right. If they have crept off, the tempo value is wrong, often by a fraction. Adjust it until the late markers line up too.
  • Check the bar count, not just the beat. A grid can sit on every kick and still treat beat two as the downbeat. Sync will then line up your phrases one beat late, which wrecks phrase-aligned mixing even when the kicks match.
  • Lock it. Most programs let you lock a grid once it is correct. Do this, so a re-analysis or a sync to another library does not overwrite your work.

Do this when you import tracks, not in the booth. If you play from a USB stick, the grid you set at home is the one the player reads. Our guide on preparing a USB for CDJs covers the export side.

Does sync work on club CDJs?

Yes, with conditions. On Pioneer DJ players, Beat Sync relies on rekordbox analysis data, so tracks need to be analysed and exported with their grids. The players also have to be linked to each other via Pro DJ Link, normally through the mixer or a network hub. Check the link status on the player screen before your first transition, not during it.

Two things surprise DJs who move from a controller to CDJs. First, while Beat Sync is active, the tempo fader stops controlling the speed. To change tempo, you change it on the master deck, or you switch sync off. Second, the player assigns the master to whichever deck it considers the reference. Glance at which deck shows MASTER before you trust it.

Is using sync cheating, and should you still learn to beatmatch?

Using sync is not cheating. The audience hears the mix, not the method, and no crowd has ever left a floor because a waveform was locked. What sync takes away is a task, not a skill. Track selection, phrasing, EQ and reading the room stay entirely with you.

The honest case for learning to beatmatch by ear anyway is practical. It is the only way to tell instantly whether a synced mix is actually in time. You will hear a slightly offset grid before it turns into a flam. When the link cable is missing, a track has no usable grid or you are handed a vinyl setup, you can still play. The same ear carries you through a long blend. If you want to drill it step by step, the free DJ NOTES course covers beatmatching in lesson 1.

A sensible path for most new DJs is to learn manual beatmatching first, then use sync as a tool. That means keeping it on for long, layered or loop-heavy mixes, switching it off when a track has a live feel, and staying ready to nudge in either case.

The short version

Most sync follows grids, not the audio. Beat sync locks speed and phase, while tempo sync locks speed and leaves placement to you. When synced tracks drift, the fix is almost always a beatgrid with the wrong downbeat, a slightly wrong BPM or a track that never had a steady tempo. Clean your grids at home, check the link and master in the booth, and keep your ears switched on. Used that way, sync is neither a crutch nor cheating. It is one more control on the deck.

Frequently Asked Questions

Why are my tracks out of time even with sync on?

Grid-based sync aligns beatgrids, not audio. If the first downbeat marker is slightly off the kick, the BPM was detected a fraction wrong, or the track has a drifting live tempo, the grids line up while the kicks do not. Fix the grid and the drift disappears.

What is the difference between Simple Sync and Smart Sync in Serato?

Simple Sync matches the BPM and snaps the two closest transients together, so it needs no beatgrid, but it does not keep the tracks phase-locked. Smart Sync uses beatgrids and keeps tracks phase-locked, so loops and cue jumps stay on the beat, but it needs accurate grids.

Why can't I move the tempo fader on a CDJ when sync is on?

While Beat Sync is active on Pioneer DJ players, the synced deck follows the master deck's tempo, so its own tempo fader is disabled. Change the tempo on the master deck or switch sync off to take manual control again.

Do professional DJs use sync?

Many do, especially for layered, loop-heavy or multi-deck sets. Others mix manually by preference. Crowds cannot hear which method was used; what they hear is track choice, phrasing and EQ.

Does sync work with old disco or live recordings?

Often not reliably. Those tracks were played by humans and the tempo moves, so a fixed beatgrid cannot follow them. Dynamic analysis modes help, but for drummer-played music check the grid by ear or mix manually.


Read next